|
|
| |
 |
|
|
|
| |
|
| "Your team did an excellent job. We have referred you to other consultants. We will certainly consider your resource in the future."
|
| - Ted Smith |
|
|
| |
|
Electrical Services |
|
|
We provide drafting and design services in the field of Electrical engineering that are cost effective, timely and responsive to client needs. We follow NEC and IEC standards for designing Electrical Systems. Our electrical services include:
Design and Drafting of Lighting System
- Determining the Lux levels for each classified areas together with lighting controls requirements for power savings, for both indoor and outdoor lightings
- Light Fixture Layout Designing involving Normal, Emergency, Critical and Life Safety
- Light Fixtures Identification as per recommended Standards and Occupancy sensors, dimmers etc., their selection, and placement at appropriate location
- Worst-Case Egress Lighting Estimation
- Lighting Load Estimations and determining numbers of feeder for Lighting Panel
- Lighting Distribution Panel design
- Switchgear Sizing
- Determining Transformer Size for Lighting Distribution system
- Designing the Life safety and Emergency Panel
- Determining the Lighting Panel Location based on provided inputs
Design and Drafting of Power System
- Determining the Receptacle, Electrical and Electronics equipments for all areas
- Determining the Loads for Electrical and Electronics equipments
- Determining the connected Load on each Circuits
- Power Distribution Panel design
- Determining Transformer Size for Power Distribution
- Designing the Life safety and Emergency Panel
- Determining Earth Protection requirements
- Switchgear Sizing
Design and Drafting of Power Distribution System
- Determining Power and Lighting Load determination on the basis of actual connected equipment with appropriate demand/diversity factors, as per recommended standards
- Determining the Total Power Requirements
- Determining Power Factor Correction requirements
- Determining the Main Transformer requirements
- Determining the size of Generator
- Determining the HV equipments, metering and protective switchgear requirements
- Determining Cable Trays, Trenches their optimum path
- Switchgear Sizing
- Determining the cable and wire sizing
- Determining the one line diagram for distribution system
Design and Drafting of Fire Protection System
- Determining the numbers of Circuits and device types according to defined areas
- Determining the Integration requirements with respect to Annunciation, Automatic Dialing and Building Management Systems
- Fire Detector, Enunciator, Manual Points and Panel Layout
- Control Diagram for Remote Panels and Main Panels
- Riser Diagram
- Device and Panel schedule
- Control Circuits for Integration with Building Management Systems
|
|
